How to care for your garden tools

Garden tools are maintenance equipment for human greening scenes, and they are closely related to our lives. In order to make the plants in the garden have a better shape and can bring us beautiful enjoyment, the daily care of garden tools is very important.
The use of common garden tools and daily maintenance methods are introduced below.
There are many types of garden tools, each with its own purpose and characteristics. Common hedge trimmers, lawn mowers, chainsaws, garden shears, garden saws, electric chain saws, multifunctional machines, earth drills, chains, blades, saw blade Wait for a variety of garden tools.
Hedge trimmer
Hand-held wood cutting machine powered by gasoline engine and saw chain as cutting part. In forestry production, it is widely used in logging, pruning, and timber production. At present, most of them are used for shaping, pruning and pruning of landscaping.
Maintenance method: fully inspect the machine before use to ensure that the machine is in good condition before use, and at the same time regularly lubricate the machine head, chain and blade. If it is not used for a long time, it is best to start it once a week for 15 minutes each time.
Carbon Steel Geared wavy blades hedge shears
Because it is small and easy to carry, when using it to trim branches, you need to distinguish which scissors to use based on the thickness of the branches.
Maintenance method: After using the product, it also needs to be rust-proofed. This can prolong the life of the product and also save us some costs.
The lawn mower
Lawn mower is a mechanical tool for mowing lawns, vegetation, etc. It consists of a cutter head, an engine, a walking wheel, a walking mechanism, a blade, an armrest and a control part. The cutter head is mounted on the traveling wheel, the cutter head is equipped with an engine, and the output shaft of the engine is equipped with a blade. The blade uses the high-speed rotation of the engine to increase the speed a lot, saving the operation time of the weeder and reducing a lot of human resources.
Maintenance method: To ensure safety, be sure to remove the spark plug cap before performing any maintenance items. Change the oil every 1 month or 20 hours of work.Every 3 months or 50 hours of work, clean or replace the air filter. Every 6 months of use or 100 hours of work, change the oil, periodically check, clean or adjust the spark plug, and adjust the valve clearance.
Garden tools can easily rust metal and drop plating in a humid environment, so the place where garden tools are placed should be dry. If you want to clean garden tools, remember not to use boiling water or running water to clean them, just wipe them with a damp cloth. If it is improperly stored and rusted, don't sand it with sandpaper immediately. If it is relatively small, you can wipe it with cotton cloth and oil.
Finally, Metal Max reminded that all garden tools should be kept away from acid and alkali items. If they are accidentally stained with acid or alkaline products, rinse the stains with water in time, and then wipe them with cotton cloth. Prolonged sun exposure will cause the surface paint of garden tools to change color and fall, and oxidize and transform the metal on the inner layer. Therefore, it cannot be exposed to direct sunlight for a long time.